lsa plus Back mount frame 2/10 for krone lsa module

lsa plus Back mount frame 2/10 for krone lsa module

Descriptions:

1) LSA-PLUS back mount frames consists of U-shaped stainless-steel sheet. this means a high degree of stabiltiy and full corrosion resistance.

2) Depending on requirement, back-mount frames can be used to accomodate various numbers of modules as mentioned below

3) This recommendation is based on a conductor diameter 0.5mm,including insulation 1.5mm

4) Deep frames must be selected for wires measuring 0.6mm-0.9mm , or the cable has to be fed through the back-mount frame bundle by bundle

Main Features:

• 1. With central cable entry, for special use with mounting adapters for wall mounting or for krone box
• 2. Pitch: 22.5mm with two-side jumper guides
• 3. Necessary installation space/back-mount frame length=pitchX(number of modules-1)+20mm
• 4. It is used for mounting 10 pairs lsa disconnection or connection modules
• 5. Stainless steel with rubber grommet
• 6. 1way,3 way,5 way,10 way,11 way can be choosed

Back mount frame for lsa module

bmf 2/10

proifile mounting

lsa plus Back mount frame 2/10 for krone lsa module Images